This versatile Coil Handling System is designed for handling a wide range of material widths and thicknesses. The coil load car provides efficient coil loading. The combination hold down wheel/peeler/threader end debender and exit thread table allow one operator to power thread material from the reel to roll feed entry. 

CHS Automation offers a comprehensive line of equipment designed to facilitate hands free threading of the coil lead edge for quick coil changes. A motorized hold down prevents coil clock spring and threads stock. The hold down wheel rotation rate is variable via flow controls and is operated simultaneously with the reel threading drive. The retractable peeler blade extends to the coil O.D. to peel the outer wrap of stock. The peeler table supports the stock from the reel to the powered straightener. Heavy gauge stock may be flattened between the hold down and peeler table. An exit thread table supports the straightener to the servo feed during thread operation. Threading recommendations are quoted to meet your material width and thickness requirements. 

DR200 - PS300 - DRF454

CHS Automation offers a comprehensive line of equipment designed to facilitate hands free threading of the coil lead edge for quick coil changes. A motorized hold down prevents coil clock spring and threads stock. The hold down wheel rotation rate is variable via flow controls and is operated simultaneously with the reel threading drive. The retractable peeler blade extends to the coil O.D. to peel the outer wrap of stock. The peeler table supports the stock from the reel to the powered straightener. Heavy gauge stock may be flattened between the hold down and peeler table. An exit thread table supports the straightener to the servo feed during thread operation. Threading recommendations are quoted to meet your material width and thickness requirements. 

R200 - PS500 - DRF630

This Extra Heavy Duty Coil Handling System  was designed and manufactured for a heavy metal stamper in Brampton Ontario. Capacities and features of this feed line are 40,000 lb capacity on the Traveling Coil Reel and Stationary Load Car. Reel and Straightener are equipped with clock spring guard, anti-tip arms, hydraulic thread drive, hydraulic peeler threader and debender system, air operated entrance and exit pinch roll, motorized Straightener roll adjustment via five screw jacks with over torque limits. Straightener model number is a PS 4x7x72, 5” diameter breaker rolls with 6.8” diameter air operated entrance and exit pinch rolls with a 70 hp AC variable speed drive and control. 

TR400 - PS4-7-72 - DRF672

This Extra Heavy Duty Coil Handling System  was designed and manufactured for a heavy metal stamper in Milton Ontario. Capacities and features of this feed line are 60,000 lb capacity on the Coil Reel and Load Car. Reel and Straightener are equipped with clock spring guard, anti-tip arms, hydraulic thread drive, hydraulic peeler threader and debender system, air operated entrance and exit pinch roll, motorized Straightener roll adjustment via five screw jacks with over torque limits. Straightener model number is a PS 5x7x72, 5” diameter breaker rolls with 6.8” diameter air operated entrance and exit pinch rolls with a 70 hp AC variable speed drive and control.